Panels & Accessories

Control Panel, High Water & Alarm Panels, Junction Box, Pump Mounting Bracket

BG-CP-A

Advanced Control Panel

BG-CP
The BG-CP-A (Advanced Control Panel) is an important and compact way to display and monitor bilge pump functions at the bridge of the vessel. All the essential functions of a bilge pump system are at the crew’s finger tips. The control panel has one alarm detection LED with an accompanying 83 dB sound output audio alarm. The alarm can be used as a high water alarm, oil detection alarm, or any other available alarm on the vessel (e.g. fire).

The BG-CP-A includes a dedicated pump LED, an easy to read 4-digit
display with a reset button, and a fuse holder located on the front panel. The illuminated three position pump switch has OFF, Auto, and momentary Manual override functions. The display shows the live voltage then cycles through bilge pump count, run time, input voltage, and output current. The control panel also features three different brightness settings for the display and on-board memory to store the pump count in the event of a power outage to the panel.
  • Green LED
    Pump running
  • Red LED
    Alarm (e.g. high water, oil, fire)
  • Four Digit Display
    Pump counter, voltage, current, pump run time
  • Reset Button (Pump Counter, Pump Run Time, Voltage, Current)
    Reset — Press and hold for 3 seconds to reset counter Cycle Display Information — Press 1 time to cycle through the last pump run time in minutes and seconds, voltage, and current. Adjust Display Brightness — Press and hold button while the display is showing voltage to adjust the brightness of the display and release on desired brightness
  • Bilge Pump Switch
    Green Light ON — Pump in auto mode
    OFF — Pump off, panel off
    Manual Momentary Switch — Press to turn on, release to turn off
  • Rear Electrical Board
    With detailed labels
  • Voltage Compatibility
    12, 24, or 32 Vdc
  • Operations
    Up to 20 amps
  • Alarm Buzzer
    83 dB
  • Dimensions
    (W x H x H) — 3.5 in x 2.1 in x 2.4 in

BG-CP

Control Panel

BG-CP
The BG-CP (Control Panel) is an important and convenient way to display and monitor bilge pump functions at the bridge of the vessel. All the essential functions of alarms and controls are at the crew’s finger tips.

The control panel displays oil and high water detection LEDs with an accompanying 97 dBA sound output audio alarm. The BG-CP includes an easy to read bilge pump counter with a reset button and fuse holder located on the front panel. The illuminated three position pump switch has an OFF, Auto, and Manual override function.
  • LED Display
    High water detected, oil detected, and pump running
  • Pump Counter
    Number of times pump ran (up to 99), with Reset button
  • Audio Alarm
    Audible 97 dB alarm, with Mute button
  • Bilge Pump Switch
    Off, Auto, Manual
  • Rear Electrical Board
    With detailed labels
  • Voltage Compatibility
    12, 24, or 32 Vdc
  • Operations
    Up to 20 amps
  • Dimensions
    (L x W x H) — 5.4 in x 2.5 in x 4.0 in

BG-CP-E

Control Panel Mounted in Enclosure

BG-CP
The BG-CP-E (Control Panel Mounted in Enclosure) is an important and convenient way to display and monitor bilge pump functions. All the essential functions of alarms and controls are at the crew’s finger tips.

The control panel displays oil and high water detection LEDs with an accompanying 97 dBA sound output audio alarm. The BG-CP-E includes an easy to read bilge pump counter with a reset button and fuse holder located on the front panel. The illuminated three position pump switch has an OFF, Auto, and Manual override function.
  • LED Display
    High water detected, oil detected, and pump running
  • Pump Counter
    Number of times pump ran (up to 99), with Reset button
  • Audio Alarm
    Audible 97 dB alarm, with Mute button
  • Bilge Pump Switch
    Off, Auto, Manual
  • Rear Electrical Board
    With detailed labels
  • Voltage Compatibility
    12, 24, or 32 Vdc
  • Operations
    Up to 20 amps
  • Dimensions
    (L x W x H) — 7.7 in x 2.9 in x 6.4 in

BG-AP-1, BG-AP-2, BG-AP-4

High Water & Alarm Panels

BG-CP
BG-AP-1 (High Water Alarm)
The BG-AP-1 High Water Alarm Panel is a convenient way to be alerted of a high water detection event in your vessel. The BG-AP-1 features 1 visual alarm light and 1 audible 97 dB alarm speaker. The operating voltage of the BG-AP-1 is 9-36 Vdc. The BG-AP-1 also comes with optional mute switch terminals. The BG-AP-1 is easy to integrate into your current high water alarm system with easy terminal connectors for ground and the alarm wire. The BG-AP-1 is compatible with Blue Guard Innovations BG-HW and BG-SWA alarm outputs. The BG-AP-1 comes with four #4 ½” 316 stainless steel mounting screws.

BG-AP-2, BG-AP-4 (Alarm Panel)
The BG-AP-2 and BG-AP-4 Alarm Panels are a convenient way to be alerted of multiple vessel alarms on one centralized panel. The BG-AP-2 features 2 visual alarm lights and 1 audible 97 dB alarm speaker. The operating voltage of the BG-AP-2 and BG-AP-4 is 9-36 Vdc. Both alarm panels come with optional mute switch terminals. The BG-AP-4 features 4 visual alarm lights and 1 audible 97 dB alarm speaker. The BG-AP-2 and BG-AP-4 easily integrate into your current vessels alarms systems with easy terminal connectors for ground and alarm wire(s). The BG-AP-2 and BG-AP-4 are compatible with Blue Guard Innovations BG-HW, BG-SWA, BG-One, and BG-Oil alarm outputs. The BG-AP-2 and BG-AP-4 each comes with four #4 ½” 316 stainless steel mounting screws.
  • LED Display
    BG-AP-1 — 1 Light
    BG-AP-2 — 2 Lights
    BG-AP-4 — 4 Lights
  • Audio Alarm
    Audible 97 dB alarm, with optional Mute switch terminals
  • Rear Electrical Board
    With detailed labels
  • Operating Voltage
    9 – 36 Vdc
  • Max Current Draw
    100 mA @ 12 Vdc
  • Operating Temperature
    -22°F – 158°F / -30°C – 70°C
  • Dimensions
    (W x H x D) — 2.7 in x 2.1 in x 2.0 in

BG-JBox

Junction Box

BG-JBox
The BG-JBox (Junction Box) is a splash proof interconnect junction featuring a transparent cover and LED indicators showing active connections. It is capable of handling 20 amp power connections and designed to keep all interconnected wires dry and reliable. It is a simple interconnector between the BG-One or BG-Oil, BG-HW, BG-CP, and bilge pump.
  • Electrical Board
    With detailed labels and status LEDs
  • Durability
    Splash proof enclosure
  • Voltage Compatibility
    12, 24, or 32 Vdc
  • Operations
    Up to 20 amps
  • Dimensions
    (L x W x H) – 7.7 in x 2.0 in x 6.4 in

Pump Mounting Bracket

The Pump Mounting Bracket allows Blue Guard sensors to be mounted directly onto bilge pumps for easy installation.

The Pump Mounting Bracket comes in two different size ranges:

  • MTB-250375: 2.5″ – 3.75″ diameters
  • MTB-312412: 3.125″ – 4.125″ diameters

*Bilge pump and sensor not included.

© Blue Guard Innovations, LLC | Privacy Policy

| Return Policy