Blue Guard Innovations, Boat Electronics, Boat Accessories, Bilge Pump Switch, BG-ONE, Smart Boat Pump Switch, Pittman 2019 Award Winner, Smart Bilge Pump Switch, Oil Sensor, Oil and Fuel Detector

Blue Guard Innovations, Boat Electronics, Boat Accessories, Bilge Pump Switch, BG-ONE, Smart Boat Pump Switch, Pittman 2019 Award Winner, Replacement Float Switch, Oil Sensor, Oil and Fuel Detector

Blue Guard Innovations, Boat Electronics, Boat Accessories, Bilge Pump Switch, BG-ONE, Pittman 2019 Award Winner, Replacement Float Switch, Oil Sensor, Oil and Fuel Detector, Install

Blue Guard Innovations, Boat Electronics, Boat Accessories, Bilge Pump Switch, BG-ONE, Pittman 2019 Award Winner, Replacement Float Switch, Bilge Pump Comparison, Oil and Fuel Detector

Solid-State Bilge Pump Switch with Oil / Fuel Alarm Sensor (BG-ONE)

$185.00

Smart bilge pump switch technology precisely detects oil and fuel with accuracy down to 1mm (0.04 in). The solid-state bilge pump switch and alarm sensor enables boat operators to control their bilge pumps and mitigate overboard discharge of oil or fuel. BG-ONE differentiates between water, oil/fuel, and air and will trigger an alarm if either fuel or oil is detected in the bilge.

Three operation modes enable boaters to operate safely in any environment:

Marina Mode (factory default) - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will turn back ON when only water is detected.
Marine Sanctuary Mode - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will remain OFF until the alarm and bilge is cleared (requires power cycling device).
High Seas Mode - Pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected.

For boaters who are tired of frequently replacing faulty float switches, BG-ONE operates with two integrated sensors and no moving parts. For boaters worried about USCG fines for oil spills, BG-ONE minimizes boat owners’ and operators' liability for costly cleanup and pollution fines through selective pumping. Click here to learn about how BGI’s solid-state bilge pump switch extends the life and reliability of your bilge pump. If you’re in the market for an environmentally bilge pump switch, BG-ONE’s oil and fuel detection technology is right for you.

IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracket

Integrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store

Product Guides and Documents:

Quantity:

Add To Cart

Bluetooth connectivity enables users to configure and test your system via BGI Config App. Adjust oil detection sensitivity and pump run times, or leave it up to factory default settings. Built-in splash protection prevents false activations in rough waters (can be adjusted or disabled). Each BG-ONE comes with a mounting bracket that attaches horizontally to the bulkhead or hull with #8x0.75” 316 stainless steel screws. Connects to any 12, 24, or 32 Vdc bilge pump and alarm panel on the market today, or shop with us. See quick specs below:

Five Wire System
14 AWG marine-grade wires, 6 feet long
Operating Voltage
12, 24, or 32 Vdc
Max current
20 Amps
Alarm Output
1 amp max
Compact Size
4.6 in x 2.0 in (without mounting bracket)
Integrated Bluetooth Connectivity
Connects to the BGI Config App available on iOS and Android devices

Each patented bilge pump switch is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Each device is backed by an international standard rating of IP68 and is made of durable, corrosion resistant ABS plastic. The award-winning BG-ONE smart switch won the Pittman Innovation Award in 2019, received a Dame Design Award at METSTRADE in 2018, and won the Product Innovation Award at IBEX in 2018.