Switches
Smart bilge pump switch technology precisely detects oil and fuel with accuracy down to 1mm (0.04 in). The solid-state bilge pump switch and alarm sensor enables boat operators to control their bilge pumps and mitigate overboard discharge of oil or fuel. BG-ONE differentiates between water, oil/fuel, and air and will trigger an alarm if either fuel or oil is detected in the bilge.
Three operation modes enable boaters to operate safely in any environment:
Marina Mode (factory default) - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will turn back ON when only water is detected.
Marine Sanctuary Mode - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will remain OFF until the alarm and bilge is cleared (requires power cycling device).
High Seas Mode - Pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected.
For boaters who are tired of frequently replacing faulty float switches, BG-ONE operates with two integrated sensors and no moving parts. For boaters worried about USCG fines for oil spills, BG-ONE minimizes boat owners’ and operators' liability for costly cleanup and pollution fines through selective pumping. Click here to learn about how BGI’s solid-state bilge pump switch extends the life and reliability of your bilge pump. If you’re in the market for an environmentally bilge pump switch, BG-ONE’s oil and fuel detection technology is right for you.
IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracket
Integrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store
Product Guides and Documents:
With two integrated sensors, the BG-SWA detects fluid in the bilge and will automatically turn ON the bilge pump. The bilge pump will turn OFF when no water or liquid is detected. Continuous fluid detection of 3 seconds (factory default setting) will trigger the high water alarm - this can signify a non-working or overwhelmed bilge pump.
Wireless Bluetooth connectivity enables users to configure the pump run time and high water alarm activation delay via BGI Config App. Test your bilge pump and enable splash protection to prevent false activations in rough waters (can be adjusted or disabled).
Each BG-SWA comes with a mounting bracket that attaches horizontally or vertically to the bulkhead or hull with #8x0.75” 316 stainless steel screws. Connects to any 12, 24, or 32 Vdc bilge pump and alarm panel on the market today, or shop with us. See quick specs below:
Five Wire System
14 AWG marine-grade wires, 6 feet longOperating Voltage
12, 24, or 32 VdcMax current
20 AmpsAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store
Product Guides and Documents:
Our reliable bilge pump switch technology automatically removes collected water in the bilge. Two integrated sensors will turn the bilge pump ON when water or any liquid is detected and turn OFF when no water or liquid is detected. With no moving parts, the BG-SW is a dependable alternative to mechanical float switches. Wireless Bluetooth connectivity enables users to adjust pump run time, test, and view its status via BGI Config App. Built-in splash protection to prevent false activation in rough waters - adjustable and can be disabled.
Each BG-SW comes with a mounting bracket that attaches horizontally or vertically to the bulkhead or hull with #8x0.75” 316 stainless steel screws. Connects to any 12, 24, or 32 Vdc bilge pump and alarm panel on the market today, or shop with us. See quick specs below:
Four Wire System
14 AWG marine-grade wires, 6 feet longOperating Voltage
12, 24, or 32 VdcMax current
20 AmpsAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store
Product Guides and Documents:
This bundle combines the Solid-State Bilge Pump Switch with High Water Alarm Sensor (BG-SWA) and Bilge Pump Control Panel & Alarm (BG-CP-A).
When fluid is detected in the bilge, two integrated sensors will signal the bilge pump to automatically turn ON. The bilge pump will turn OFF when no water or liquid is detected. Continuous fluid detection of 3 seconds (factory default setting) will trigger the high water alarm. Control and monitor your bilge pump and be alerted of potential high water threats with the BG-CP-A.
Wireless Bluetooth connectivity enables users to configure the pump run time and high water alarm activation delay (from 3-10 seconds) via BGI Config App. Test your bilge pump and enable splash protection to prevent false activations in rough waters (can be adjusted or disabled). See quick specs below:
Five Wire System
14 AWG marine-grade wires, 6 feet longMax current
20 AmpsAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App StoreProgrammable Alarm
Delay activation from 3-10 seconds
Programmable Splash Protection
Off / High / Medium / Low
Programmable Pump Run Time
Run time 15-60 seconds
Product Guides and Documents:
Solid-State Bilge Pump Switch with High Water Alarm (BG-SWA)
Bilge Pump Control Panel & Alarm (BG-CP-A)
This bundle combines the Solid-State Bilge Pump Switch with Oil / Fuel Alarm Sensor (BG-ONE) and Bilge Pump Control Panel & Alarm (BG-CP-A).
Precisely detect oil and fuel with accuracy down to 1mm (0.04 in) with smart bilge pump switch technology. BG-ONE differentiates between water, oil/fuel, and air and will trigger the alarm if either fuel or oil is detected in the bilge. Control and monitor your boat’s pump and be alerted of oil or fuel in the bilge with BG-CP-A.
Three operation modes enable boaters to operate safely in any environment:
Marina Mode (factory default) - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will turn back ON when only water is detected.
Sanctuary Mode - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will remain OFF until the alarm and bilge is cleared (requires power cycling device).
High Seas Mode - Pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected.
Wireless Bluetooth connectivity enables users to adjust oil sensitivity and pump run times. Leave it up to factory default settings or configure and test your system via BGI Config App. Built-in splash protection prevents false activations in rough waters (can be adjusted or disabled). See quick specs below:
Five Wire System
14 AWG marine-grade wires, 6 feet longMax current
20 AmpsAlarm Output
12, 24, or 32 Vdc, 1 amp max alarm outputCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store