Bilge Pump Switch, Bilge Oil Detection, Bilge Fuel Detection, Bilge Control Panel, Bilge Alarm, Blue Guard Innovations
Bilge Pump Switch, Bilge Oil Detection, Bilge Fuel Detection, Bilge Control Panel, Bilge Alarm, Blue Guard Innovations, Install, Marine Switches
Boat Control Panel, Boat Alarm, Boat Switch Panel, Bilge Pump Switch, Bilge Oil Detection, Bilge Fuel Detection, Bilge Control Panel, Bilge Alarm, Blue Guard Innovations,
Blue Guard Innovations, Comparison Table, Switches, Sensors, Control Panels, Alarms, Boat Electronics, Marine Electronics
Bilge Pump Switch, Bilge Oil Detection, Bilge Fuel Detection, Bilge Control Panel, Bilge Alarm, Blue Guard Innovations
Bilge Pump Switch, Bilge Oil Detection, Bilge Fuel Detection, Bilge Control Panel, Bilge Alarm, Blue Guard Innovations, Install, Marine Switches
Boat Control Panel, Boat Alarm, Boat Switch Panel, Bilge Pump Switch, Bilge Oil Detection, Bilge Fuel Detection, Bilge Control Panel, Bilge Alarm, Blue Guard Innovations,
Blue Guard Innovations, Comparison Table, Switches, Sensors, Control Panels, Alarms, Boat Electronics, Marine Electronics

Bilge Pump Switch with Oil / Fuel Detection Alarm and Control Panel

$280.00
On Backorder

This bundle combines the Solid-State Bilge Pump Switch with Oil / Fuel Alarm Sensor (BG-ONE) and Bilge Pump Control Panel & Alarm (BG-CP-A).

Precisely detect oil and fuel with accuracy down to 1mm (0.04 in) with smart bilge pump switch technology. BG-ONE differentiates between water, oil/fuel, and air and will trigger the alarm if either fuel or oil is detected in the bilge. Control and monitor your boat’s pump and be alerted of oil or fuel in the bilge with BG-CP-A.

Three operation modes enable boaters to operate safely in any environment:

  • Marina Mode (factory default) - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will turn back ON when only water is detected.

  • Sanctuary Mode - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will remain OFF until the alarm and bilge is cleared (requires power cycling device).

  • High Seas Mode - Pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected.

Wireless Bluetooth connectivity enables users to adjust oil sensitivity and pump run times. Leave it up to factory default settings or configure and test your system via BGI Config App. Built-in splash protection prevents false activations in rough waters (can be adjusted or disabled). See quick specs below:

  • Five Wire System
    14 AWG marine-grade wires, 6 feet long

  • Max current
    20 Amps

  • Alarm Output
    12, 24, or 32 Vdc, 1 amp max alarm output

  • Compact Size
    4.6 in x 2.0 in (without mounting bracket)

  • IP-68 Rated Durability
    Rugged, non-corrosive ABS plastic housing and mounting bracket

  • Integrated Bluetooth Connectivity
    Connects to the BGI Config App available on Google Play and the App Store

This bundle combines the Solid-State Bilge Pump Switch with Oil / Fuel Alarm Sensor (BG-ONE) and Bilge Pump Control Panel & Alarm (BG-CP-A).

Precisely detect oil and fuel with accuracy down to 1mm (0.04 in) with smart bilge pump switch technology. BG-ONE differentiates between water, oil/fuel, and air and will trigger the alarm if either fuel or oil is detected in the bilge. Control and monitor your boat’s pump and be alerted of oil or fuel in the bilge with BG-CP-A.

Three operation modes enable boaters to operate safely in any environment:

  • Marina Mode (factory default) - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will turn back ON when only water is detected.

  • Sanctuary Mode - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will remain OFF until the alarm and bilge is cleared (requires power cycling device).

  • High Seas Mode - Pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected.

Wireless Bluetooth connectivity enables users to adjust oil sensitivity and pump run times. Leave it up to factory default settings or configure and test your system via BGI Config App. Built-in splash protection prevents false activations in rough waters (can be adjusted or disabled). See quick specs below:

  • Five Wire System
    14 AWG marine-grade wires, 6 feet long

  • Max current
    20 Amps

  • Alarm Output
    12, 24, or 32 Vdc, 1 amp max alarm output

  • Compact Size
    4.6 in x 2.0 in (without mounting bracket)

  • IP-68 Rated Durability
    Rugged, non-corrosive ABS plastic housing and mounting bracket

  • Integrated Bluetooth Connectivity
    Connects to the BGI Config App available on Google Play and the App Store

Each BG-ONE comes with a mounting bracket that attaches horizontally to the bulkhead or hull with #8x0.75” 316 stainless steel screws. The best alternative to replacing faulty float switches and bilge pumps is the non-jammable BG-ONE. Blue Guard Innovation’s bilge pump switch operates with two integrated sensors and no moving parts. BG-ONE minimizes boat boater’s liability for costly USCG fines through selective pumping. Click here to learn about how BGI’s solid-state bilge pump switch extends the life and reliability of your bilge pump.

Each patented bilge pump switch and sensor is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Each device is backed by an international standard rating of IP68 and is made of durable, corrosion resistant ABS plastic.  The award-winning BG-ONE smart switch won the Pittman Innovation Award in 2019, received a Dame Design Award at METSTRADE in 2018, and won the Product Innovation Award at IBEX in 2018. 

The BG-CP-A alarm and switch panel includes a dedicated green LED pump light, a red detection LED light, and an 83 dB sound output audio alarm.  It features a 4-digit counter that displays bilge pump count, run time, input voltage, and output current. Adjust display brightness, reset the counter, cycle display information at the touch of a button. To the right of an integrated fuse holder is a lighted three-position pump switch that has OFF, Auto, and momentary Manual override functions. The onboard memory stores pump count in case of a power outage. See quick specs below:

  • Four Digit Display
    Pump counter, voltage, current, pump run time

  • Voltage Compatibility
    12, 24, or 32 Vdc

  • Operations
    Fuse 25 amps max and 20 amps max continuous

  • Dimensions
    (W x H x H) — 3.5 in x 2.1 in x 2.4 in

You Might Also Like