Bilge Pump Switch with High Water Alarm and Control Panel
This bundle combines the Solid-State Bilge Pump Switch with High Water Alarm Sensor (BG-SWA) and Bilge Pump Control Panel & Alarm (BG-CP-A).
When fluid is detected in the bilge, two integrated sensors will signal the bilge pump to automatically turn ON. The bilge pump will turn OFF when no water or liquid is detected. Continuous fluid detection of 3 seconds (factory default setting) will trigger the high water alarm. Control and monitor your bilge pump and be alerted of potential high water threats with the BG-CP-A.
Wireless Bluetooth connectivity enables users to configure the pump run time and high water alarm activation delay (from 3-10 seconds) via BGI Config App. Test your bilge pump and enable splash protection to prevent false activations in rough waters (can be adjusted or disabled). See quick specs below:
Five Wire System
14 AWG marine-grade wires, 6 feet longMax current
20 AmpsAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App StoreProgrammable Alarm
Delay activation from 3-10 seconds
Programmable Splash Protection
Off / High / Medium / Low
Programmable Pump Run Time
Run time 15-60 seconds
Product Guides and Documents:
Solid-State Bilge Pump Switch with High Water Alarm (BG-SWA)
Bilge Pump Control Panel & Alarm (BG-CP-A)
This bundle combines the Solid-State Bilge Pump Switch with High Water Alarm Sensor (BG-SWA) and Bilge Pump Control Panel & Alarm (BG-CP-A).
When fluid is detected in the bilge, two integrated sensors will signal the bilge pump to automatically turn ON. The bilge pump will turn OFF when no water or liquid is detected. Continuous fluid detection of 3 seconds (factory default setting) will trigger the high water alarm. Control and monitor your bilge pump and be alerted of potential high water threats with the BG-CP-A.
Wireless Bluetooth connectivity enables users to configure the pump run time and high water alarm activation delay (from 3-10 seconds) via BGI Config App. Test your bilge pump and enable splash protection to prevent false activations in rough waters (can be adjusted or disabled). See quick specs below:
Five Wire System
14 AWG marine-grade wires, 6 feet longMax current
20 AmpsAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App StoreProgrammable Alarm
Delay activation from 3-10 seconds
Programmable Splash Protection
Off / High / Medium / Low
Programmable Pump Run Time
Run time 15-60 seconds
Product Guides and Documents:
Solid-State Bilge Pump Switch with High Water Alarm (BG-SWA)
Bilge Pump Control Panel & Alarm (BG-CP-A)
This bundle combines the Solid-State Bilge Pump Switch with High Water Alarm Sensor (BG-SWA) and Bilge Pump Control Panel & Alarm (BG-CP-A).
When fluid is detected in the bilge, two integrated sensors will signal the bilge pump to automatically turn ON. The bilge pump will turn OFF when no water or liquid is detected. Continuous fluid detection of 3 seconds (factory default setting) will trigger the high water alarm. Control and monitor your bilge pump and be alerted of potential high water threats with the BG-CP-A.
Wireless Bluetooth connectivity enables users to configure the pump run time and high water alarm activation delay (from 3-10 seconds) via BGI Config App. Test your bilge pump and enable splash protection to prevent false activations in rough waters (can be adjusted or disabled). See quick specs below:
Five Wire System
14 AWG marine-grade wires, 6 feet longMax current
20 AmpsAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App StoreProgrammable Alarm
Delay activation from 3-10 seconds
Programmable Splash Protection
Off / High / Medium / Low
Programmable Pump Run Time
Run time 15-60 seconds
Product Guides and Documents:
Solid-State Bilge Pump Switch with High Water Alarm (BG-SWA)
Bilge Pump Control Panel & Alarm (BG-CP-A)
Each BG-SWA comes with a mounting bracket that attaches horizontally or vertically to the bulkhead or hull with #8x0.75” 316 stainless steel screws. The solid-state bilge pump switch has no moving parts and is a reliable replacement to mechanical float switches. Automatically detect water in the bilge and control the pump with the reliable and durable BG-SWA. Click here to learn about how BGI’s solid-state bilge pump switch extends the life and reliability of your bilge pump.
Each patented bilge pump switch and sensor is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Each device is backed by an international standard rating of IP68 and is made of durable, corrosion resistant ABS plastic. Blue Guard Innovations has won the Pittman Innovation Award in 2019, received a Dame Design Award at METSTRADE in 2018, and won the Product Innovation Award at IBEX in 2018.
The BG-CP-A high water alarm and switch panel includes a dedicated green LED pump light, a red high water LED light, and an 83 dB sound output audio alarm. It features a 4-digit counter that displays bilge pump count, run time, input voltage, and output current. Adjust display brightness, reset the counter, cycle display information at the touch of a button. To the right of an integrated fuse holder is a lighted three-position pump switch that has OFF, Auto, and momentary Manual override functions. The onboard memory stores pump count in case of a power outage. See quick specs below:
Four Digit Display
Pump counter, voltage, current, pump run timeVoltage Compatibility
12, 24, or 32 VdcOperations
Fuse 25 amps max and 20 amps max continuousDimensions
(W x H x H) — 3.5 in x 2.1 in x 2.4 in
