All Products
Smart Marine Monitoring Products & Control Systems for Boats
Blue Guard Innovation provides smart marine monitoring products & control systems for boats and marine vessels. Learn more about our revolutionary products
Smart Skipper™ Tank Level Monitoring Mate (BGWS-06) remotely monitors the level of liquid in your boat’s fuel and/or water tanks. Configure your tank level alarm setting from the Smart Skipper™ app. Enable app alerts and push notifications to be sent to connected devices if your tank level fluctuates from set parameters.
1x GPS / Geofence Mate (BGWS-00) with an External GPS Antenna (9.8ft / 3m cord)
1x Smart Tablet Tab M8, 8” HD Display with Rugged Case
1x ATO/ATC In-Line Fuse Holder, 14 AWG (BGWS-01)
2x ATO/ATC In-Line Fuse Holder, 18 AWG (BGWS-00 & BGWS-02)
2x ATC Blade Fuse 1 Amp
1x ATC Blade Fuse 5 Amp
1x ATC Blade Fuse 10 Amp
1x ATC Blade Fuse 20 Amp
Smart Skipper™ GPS / Geofence Monitoring Mate (BGWS-00) is a marine GPS monitoring device that provides boaters the ability to remotely view their vessel's location. The compact design of the device allows out of sight installation.
Smart Skipper™ Bilge Pump Monitoring Mate (BGWS-01) is a marine device that remotely monitors bilge pump run and activation time, voltage, and current.
Roving Watch Mate for fully enclosed metal compartments where wireless connection is not possible.
Includes: 24’ cable harness that connects wireless Mate with buzzer, strobe light, reset button and one fire alarm input.
Smart Skipper™ Battery Monitoring Mate (BGWS-02) is a marine device that remotely monitors up to two batteries’ voltage and current (50mV shunts required). Connect devices to the battery (up to 2) and connect current shunts (up to 2). The compact design of the device allows out of sight installation.
Smart Skipper™ Load Control Mate (BGWS-04) is a digital switch device that enables boaters to remotely control their vessel’s utility and accessory devices. The compact design of the device allows out of sight installation. The Load Control Mate combined with the Smart Skipper™ app allows users to remotely turn on and off devices, such as lights, pumps, fans, and fuel shut-off valve while also allowing local hardwired control. The Load Control Mate includes two additional alarm inputs that can be configured around your vessel’s needs. In case of a power failure, the internal backup battery will keep the Load Control Mate connected. The dedicated onboard smart device will push-notifications to your smartphone.
Alarm Watch Mate comes with Buzzer, Strobe light , Mute button, and 1 Alarm Input.
The Alarm Watch Mate is placed at the helm, master quarters, or crew quarters and is used as the master device for the Roving Watch system. If a Roving Watch Mate’s button is not pressed, the Alarm Watch Mate with activate it’s buzzer and strobe to alert the captain/night watch that an area has not been checked. In the event of a fire detector activation, both the BGWS-K9 and all of the BGWS-K8 will activate their buzzers and strobes.
Note: If you have already added the Roving Watchman & Fire Alarm System Kit (BGWS-RW1) to cart, an additional BGWS-K9 is not needed.
Roving Watch Mate with buzzer, strobe light, reset button and one fire alarm input.
Additional Roving Watch Mates (BGWS-K8) may be required to ensure proper coverage of passenger accommodation spaces, common areas, and spaces with potential fire hazards (One BGWS-K8 for each zone being monitored)
-First Alert/BRK SA511 - Fire Only
Replace your current smoke alarms with these. Maximum of 11 SA511 smoke alarms can be connected to a SA520/SA521.
First Alert/BRK SA520/521 - Fire Only - Master with output
Maximum of one is recommended. Additional SA 511 are recommended to replace your existing smoke alarms.
The Smart Mate Bilge Pump Switch with High Water Alarm (SM-SWA) combines the proven sensor technology of our BG-SWA with the ability to directly connect to the Smart Skipper™ system.
Oil and Fuel detector with Bluetooth notifications straight to your mobile device.
*A cloud subscription is required for all Smart Skipper™ systems.
The cloud takes data from your boat’s sensors and pushes it to your smart device. Receive 24/7 real-time alerts, emails, and texts anywhere you have cellular service or internet access.
This cloud subscription service will automatically renew each month and includes the following features:
Cloud Storage - “anytime, anywhere” data access to your vessels systems and accessories
Two Connected Vessels - monitor and control up to two boats per subscription plan
Three Connected Users / Vessel - enables users to receive push notifications, texts, and email notifications
Five Connected Smart Mate Devices / Vessel - option to scale, purchase additional cloud storage here.
Access to Web Portal - historical data, graphing, and analysis available when needed
Remote Monitoring - ensure the security, protection, and control of your boats systems and accessories
Cancel Anytime - cancel within 5 business days of your next billing cycle for no fee
The subscription service plans include access to the easy-to-use Smart Skipper™ app and support from our dedicated team at Blue Guard Innovations.
*A cloud subscription is required for all Smart Skipper™ systems.
The cloud takes data from your boat’s sensors and pushes it to your smart device. Receive 24/7 real-time alerts, emails, and texts anywhere you have cellular service or internet access.
This cloud subscription service will automatically renew every 12 months (yearly) and includes the following features:
Cloud Storage - “anytime, anywhere” data access to your vessels systems and accessories
Two Connected Vessels - monitor and control up to two boats per subscription plan
Three Connected Users / Vessel - enables users to receive push notifications, texts, and email notifications
Five Connected Smart Mate Devices / Vessel - option to scale, purchase additional cloud storage here.
Access to Web Portal - historical data, graphing, and analysis available when needed
Remote Monitoring - ensure the security, protection, and control of your boats systems and accessories
Cancel Anytime - cancel within 5 business days of your next billing cycle for no fee
The subscription service plans include access to the easy-to-use Smart Skipper™ app and support from our dedicated team at Blue Guard Innovations.
The US Coast Guard compliant High Water Sensor (BG-HW) detects rising water levels in bilges and compartments. Ensuring the safety of the vessel and passengers, the BG-HW detects early-warning signs of water entering the hull. Built-in splash protection prevents false activations in rough waters (default disabled). When water is detected, the BG-HW will activate the alarm output (1 Amp max). Easily connect sensors to any 12, 24, or 32 Vdc alarm panel, or shop with us.
Blue Guard Innovations’ non-jammable High Water Sensor is a reliable replacement for float switches, because there are no moving parts. Water in any boat compartment can be disastrous, have confidence knowing that your investment is protected. Each patented sensor is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Each device is backed by an international standard rating of IP68 and is made of durable, corrosion resistant ABS plastic. Included in your purchase is a mounting bracket and three 316 stainless steel mounting screws. The BG-HW can be mounted horizontally or vertically.
Compliance
USCG 46 CFR 28.250 & 182.530 compliantThree Wire System
14 gauge marine grade wires, 6 feet longOperating Voltage
12, 24 or 32 VdcAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)Integrated Bluetooth Connectivity
Connects to the BGI Config App available on iOS and Android devices
Product Guides and Documents:
The Oil / Fuel Sensor & Alarm (BG-OIL) precisely detects oil and fuel at the source, before it can enter the main bilge. Ensuring the preservation of earth’s water resources, the BG-OIL offers early-warning notification of an oil or fuel leakage. When oil or fuel is detected, the BG-OIL will activate the alarm output (1 Amp max). Easily connect the sensor to any 12, 24, or 32 Vdc alarm panel, or shop with us.
Two operation modes can be configured via BGI Config App:
Latch Mode - Alarm stays ON when oil is detected, until manual reset or power cycling of device.
Standard Alarm Mode - Alarm turns ON when oil is detected. Alarm turns Off when oil is no longer detected.
Install the BG-OIL in strategic locations where oil and fuel leakage is likely to occur. Engine, fuel, or steering compartments are ideal locations for Blue Guard Innovations’ Oil / Fuel Sensor & Alarm. For boaters worried about USCG fines for oil spills, BG-OIL minimizes boat owners’ and operators' liability for costly cleanup and pollution fines through an early-warning alarm system. Included in your purchase is a mounting bracket that attaches horizontally to the bulkhead or hull with three 316 stainless steel mounting screws.
Compliance
CE and ISO 8846 Marine Ignition Protection CertifiedThree Wire System
14 gauge marine grade wires, 6 feet longOperating Voltage
12, 24 or 32 VdcAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)Integrated Bluetooth Connectivity
Connects to the BGI Config App available on iOS and Android devices
Each patented sensor is CE and ISO 8846 Marine Ignition Protection Certified, tested to ABYC-1500 standards. Each device is backed by an international standard rating of IP68 and is made of durable, corrosion resistant ABS plastic. Blue Guard Innovations, LLC has been recognized at the Pittman Innovation Award in 2019, received a Dame Design Award at METSTRADE in 2018, and won the Product Innovation Award at IBEX in 2018.
Product Guides and Documents:
Smart bilge pump switch technology precisely detects oil and fuel with accuracy down to 1mm (0.04 in). The solid-state bilge pump switch and alarm sensor enables boat operators to control their bilge pumps and mitigate overboard discharge of oil or fuel. BG-ONE differentiates between water, oil/fuel, and air and will trigger an alarm if either fuel or oil is detected in the bilge.
Three operation modes enable boaters to operate safely in any environment:
Marina Mode (factory default) - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will turn back ON when only water is detected.
Marine Sanctuary Mode - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will remain OFF until the alarm and bilge is cleared (requires power cycling device).
High Seas Mode - Pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected.
For boaters who are tired of frequently replacing faulty float switches, BG-ONE operates with two integrated sensors and no moving parts. For boaters worried about USCG fines for oil spills, BG-ONE minimizes boat owners’ and operators' liability for costly cleanup and pollution fines through selective pumping. Click here to learn about how BGI’s solid-state bilge pump switch extends the life and reliability of your bilge pump. If you’re in the market for an environmentally bilge pump switch, BG-ONE’s oil and fuel detection technology is right for you.
IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracket
Integrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store
Product Guides and Documents:
With two integrated sensors, the BG-SWA detects fluid in the bilge and will automatically turn ON the bilge pump. The bilge pump will turn OFF when no water or liquid is detected. Continuous fluid detection of 3 seconds (factory default setting) will trigger the high water alarm - this can signify a non-working or overwhelmed bilge pump.
Wireless Bluetooth connectivity enables users to configure the pump run time and high water alarm activation delay via BGI Config App. Test your bilge pump and enable splash protection to prevent false activations in rough waters (can be adjusted or disabled).
Each BG-SWA comes with a mounting bracket that attaches horizontally or vertically to the bulkhead or hull with #8x0.75” 316 stainless steel screws. Connects to any 12, 24, or 32 Vdc bilge pump and alarm panel on the market today, or shop with us. See quick specs below:
Five Wire System
14 AWG marine-grade wires, 6 feet longOperating Voltage
12, 24, or 32 VdcMax current
20 AmpsAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store
Product Guides and Documents:
Our reliable bilge pump switch technology automatically removes collected water in the bilge. Two integrated sensors will turn the bilge pump ON when water or any liquid is detected and turn OFF when no water or liquid is detected. With no moving parts, the BG-SW is a dependable alternative to mechanical float switches. Wireless Bluetooth connectivity enables users to adjust pump run time, test, and view its status via BGI Config App. Built-in splash protection to prevent false activation in rough waters - adjustable and can be disabled.
Each BG-SW comes with a mounting bracket that attaches horizontally or vertically to the bulkhead or hull with #8x0.75” 316 stainless steel screws. Connects to any 12, 24, or 32 Vdc bilge pump and alarm panel on the market today, or shop with us. See quick specs below:
Four Wire System
14 AWG marine-grade wires, 6 feet longOperating Voltage
12, 24, or 32 VdcMax current
20 AmpsAlarm Output
1 amp maxCompact Size
4.6 in x 2.0 in (without mounting bracket)IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracketIntegrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store
Product Guides and Documents:
Control your bilge pump switches and sensors with state-of-the-art BG-CP-A (advanced control panel). This marine switch panel and alarm enables you to control your boat’s electrical accessories, such as the Solid-State Bilge Pump Switch with High Water Alarm Sensor. The control panel displays and monitors pump functions. It offers a red alarm detection LED light with an accompanying 83 dB sound output audio alarm. Connect the high water alarm, oil detection alarm, or other available alarm on the vessel (e.g. fire).
The BG-CP-A includes a dedicated green LED pump light to ensure the bilge pump is running. The marine control panel 4-digit counter displays bilge pump count, run time, input voltage, and output current. Adjust display brightness, reset the counter, cycle display information at the touch of a button. To the right of an integrated fuse holder is a lighted three-position pump switch that has OFF, Auto, and momentary Manual override functions. The onboard memory stores pump count in case of a power outage.
Four Digit Display
Pump counter, voltage, current, pump run timeVoltage Compatibility
12, 24, or 32 VdcOperations
Fuse 25 amps max and 20 amps max continuousDimensions
(W x H x D) — 3.5 in x 2.1 in x 2.4 in
Product Guides and Documents:
Wiring Diagram to BGI Switch or Sensor
Reliable boat High Water Alarm Panel that is easy-to-install. The BG-AP-1 marine panel consists of one visual alarm light and 1 audible 97 dB alarm. It is compatible with High Water Sensor (BG-HW), Oil / Fuel Alarm & Sensor (BG-OIL), or with any 9-36 Vdc signal. Each boat alarm is manufactured with optional mute switch terminals that can be wired into the panel. Included with your purchase is four 316 stainless steel mounting screws.
Operating Voltage
9-36 Vdc signalDimensions
(W x H x D) — 2.7 in x 2.1 in x 2.0 inPower Usage
Consumes no power unless alarm is active
Product Guides and Documents:
Two Light Alarm Panel (BG-AP-2) alerts vessel operators of an event on one centralized panel. The BG-AP-2 boat panel is easy-to-install and consumes no power unless the alarm is activated. It consists of two visual alarm lights and one audible 97 dB alarm. It is compatible with High Water Sensor (BG-HW), Oil / Fuel Alarm & Sensor (BG-OIL), or with any 9-36 Vdc signal. Each boat alarm is manufactured with optional mute switch terminals that can be wired into the panel. Included with your purchase is four 316 stainless steel mounting screws.
Operating Voltage
9-36 Vdc signalDimensions
(W x H x D) — 2.7 in x 2.1 in x 2.0 inPower Usage
Consumes no power unless alarm is active
Product Guides and Documents:
Four Light Alarm Panel (BG-AP-4) alerts vessel operators of an event on one centralized panel. The BG-AP-4 marine panel is easy-to-install and consumes no power unless the alarm is activated. It consists of four visual alarm lights and one audible 97 dB alarm. It is compatible with High Water Sensor (BG-HW), Oil / Fuel Alarm & Sensor (BG-OIL), or with any 9-36 Vdc signal. Each boat alarm is manufactured with optional mute switch terminals that can be wired into the panel. Included with your purchase is four 316 stainless steel mounting screws.
Operating Voltage
9-36 Vdc signalDimensions
(W x H x D) — 2.7 in x 2.1 in x 2.0 inPower Usage
Consumes no power unless alarm is active
Product Guides and Documents:
Smart bilge pump switch technology precisely detects oil and fuel with accuracy down to 1mm (0.04 in). The solid-state bilge pump switch and alarm sensor enables boat operators to control their bilge pumps and mitigate overboard discharge of oil or fuel. BG-ONE differentiates between water, oil/fuel, and air and will trigger an alarm if either fuel or oil is detected in the bilge.
Three operation modes enable boaters to operate safely in any environment:
Marina Mode (factory default) - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will turn back ON when only water is detected.
Marine Sanctuary Mode - Pump will turn ON when water is detected and turn OFF when oil or fuel is detected. Pump will remain OFF until the alarm and bilge is cleared (requires power cycling device).
High Seas Mode - Pump will turn ON when any liquid is detected and turn OFF when there is no liquid detected.
For boaters who are tired of frequently replacing faulty float switches, BG-ONE operates with two integrated sensors and no moving parts. For boaters worried about USCG fines for oil spills, BG-ONE minimizes boat owners’ and operators' liability for costly cleanup and pollution fines through selective pumping. Click here to learn about how BGI’s solid-state bilge pump switch extends the life and reliability of your bilge pump. If you’re in the market for an environmentally bilge pump switch, BG-ONE’s oil and fuel detection technology is right for you.
IP-68 Rated Durability
Rugged, non-corrosive ABS plastic housing and mounting bracket
Integrated Bluetooth Connectivity
Connects to the BGI Config App available on Google Play and the App Store
Product Guides and Documents:
Blue Guard Innovations provides smart marine monitoring products & control systems for boats and marine vessels. We provide our customers with the latest technology in marine monitoring, including wireless transmitters, sensors, and software. Blue Guard Innovation provides solutions to manage environmental health, security and safety on all types of boats - from small yachts to large cruise ships.
View Additional Products